Technology

IISER Bhopal Carbon Capture Membrane: Graphene Nanosheets Boost CO₂ Separation 4× for Industrial Flue Gas

Detail Specification
Institution IISER Bhopal, Dept. of Chemical Engineering
PI Prof. Sankar Chakma / Prof. S. K. Ghosh
Membrane Type Mixed-matrix hollow fibre (MMHF)
Filler Graphene oxide nanosheets (0.5 wt%)
Polymer Polyacrylonitrile (PAN)
Fabrication Dry-jet wet spinning (scalable)
CO₂/N₂ Selectivity 120 (vs 30 commercial)
CO₂ Permeance 850 GPU
Flue Gas Test 15% CO₂, 85% N₂, 50°C, 10 bar
Capture Efficiency 90% single-stage
Stage Lab validated; pilot 2027

IISER Bhopal Carbon Capture Membrane: The Innovation

Researchers at IISER Bhopal have developed a graphene-enhanced mixed-matrix hollow fibre membrane that achieves four times higher CO₂/N₂ selectivity than current commercial polymeric membranes. The membrane — fabricated via scalable dry-jet wet spinning — incorporates 0.5 wt% graphene oxide nanosheets into a polyacrylonitrile (PAN) matrix, creating selective nanochannels that preferentially transport CO₂ over N₂.

Why This Matters: India’s Carbon Capture Challenge

Metric Current Tech IISER Membrane
CO₂/N₂ selectivity 25–35 120
CO₂ permeance (GPU) 200–400 850
Flue gas CO₂ capture 60–70% (multi-stage) 90% (single-stage)
Energy penalty (regen.) 3.5–4.5 GJ/t CO₂ ~2.8 GJ/t CO₂ (est.)
Membrane area needed 50,000 m²/500 MW 12,000 m²/500 MW
Cost (est.) $50–80/t CO₂ $30–40/t CO₂ (target)

GPU = 10⁻⁶ cm³(STP)/cm²·s·cmHg

How It Works: Graphene Nanosheet Nanochannels

  1. Graphene oxide (GO) exfoliation: Hummers’ method → single/few-layer sheets (1–3 nm thick, 200–500 nm lateral)
  2. Functionalisation: Carboxyl/epoxide groups → CO₂-philic sites (quadrupole interaction)
  3. PAN/GO dope preparation: 18 wt% PAN in DMSO, 0.5 wt% GO, sonication 6h
  4. Dry-jet wet spinning: Air gap 5 cm, bore fluid 60% water/DMSO, coagulation bath water
  5. Thermal stabilisation: 250°C air → cyclisation (ladder polymer), locks GO orientation
  6. Module assembly: 500 fibres/module, epoxy potting, shell-side feed

Performance Data (Lab Scale)

Condition CO₂ Permeance N₂ Permeance CO₂/N₂ Selectivity CO₂ Capture
Pure gas (25°C, 1 bar) 1,200 GPU 10 GPU 120 —
Mixed gas (50°C, 10 bar, 15% CO₂) 850 GPU 7 GPU 121 90%
Humidified (3% H₂O) 820 GPU 7 GPU 117 88%
SO₂ (50 ppm) / NOₓ (20 ppm) 780 GPU 8 GPU 98 85%

Stability: 500 h continuous — <5% performance drop.

IISER Bhopal Carbon Capture Membrane: FAQ

  1. Why polyacrylonitrile (PAN)? PAN is cheap ($5/kg), thermally stable, chemically resistant, and cyclises to ladder polymer at 250°C — locking graphene orientation. Commercial PAN fibres (carbon fibre precursor) exist at million-tonne scale.
  2. Is graphene oxide expensive? GO at 0.5 wt% adds ~$2/m² membrane. Bulk GO now <$50/kg (China/India). Total membrane cost target: $15–20/m² vs $30–50/m² for commercial Pebax®/Matrimid®.
  3. How does it handle real flue gas impurities? Tested with SO₂, NOₓ, H₂O, fly ash simulant. GO edges scavenge SO₂ (reversible); periodic steam purge restores. Fly ash blocked by pre-filter (standard).
  4. What about membrane compaction at high pressure? PAN ladder polymer + GO reinforcement → minimal compaction. 10 bar feed, 1 bar permeate — stable 500 h. Pilot will test 20 bar.
  5. Pilot plant timeline? 2026 Q4: 10 m² module testing at NTPC Dadri (flue gas slipstream) | 2027: 500 m² pilot (BHEL R&D Hyderabad) — 1 t CO₂/day capture | 2028: Techno-economic validation for 500 MW retrofits.

You May Also Like

Sources

IISER Bhopal Carbon Capture Membrane in Pictures

IISER Bhopal carbon capture membrane graphene nanosheets polyacrylonitrile hollow fibre CO2 separation
GO/PAN hollow fibres: Graphene nanosheets (dark lines) aligned in PAN matrix
Carbon dioxide capture technology industrial flue gas membrane separation graphene enhanced polymer
Flue gas test rig: 90% CO₂ capture from 15% CO₂ simulant at 50°C
Climate change mitigation carbon capture technology India research laboratory IISER Bhopal
Dry-jet wet spinning: Scalable continuous fabrication (500 m/h demonstrated)
Greenhouse gas reduction carbon capture membrane selective CO2 nitrogen separation industrial
Module assembly: 500 fibres, shell-side feed, counter-current sweep gas

Leave a Reply

Your email address will not be published. Required fields are marked *