JNCASR Bengaluru 6G Chip: Silicon Photonic Crystal Achieves 100 Gbps at Terahertz Frequencies
| Detail | Specification |
|---|---|
| Institution | JNCASR, Bengaluru (Centre for Nano Science & Engineering) |
| PI | Prof. K. S. Vasu / Prof. S. Raghavan |
| Frequency | 300 GHz (0.3 THz) — ITU 6G candidate band |
| Data Rate | 100 Gbps (16-QAM OFDM) |
| Platform | Silicon-on-insulator (SOI), 220 nm device layer |
| Structure | Photonic crystal waveguide (triangular hole lattice) |
| Footprint | 2 mm × 0.5 mm (chip-scale) |
| Power | <100 mW (TX + RX) |
| Stage | Lab demo; packaging + array 2027 |
JNCASR 6G Chip: Terahertz on Silicon
Researchers at JNCASR Bengaluru have demonstrated a silicon photonic crystal waveguide chip that transmits 100 Gbps at 300 GHz — a critical milestone for 6G wireless communications. The chip uses a triangular lattice of air holes etched into a silicon-on-insulator (SOI) platform to guide terahertz waves with low loss, enabling CMOS-compatible integration of THz transceivers.
The 6G Terahertz Challenge
| Requirement | 5G (mmWave) | 6G (THz) Target | JNCASR Achievement |
|---|---|---|---|
| Frequency | 24–71 GHz | 100–300 GHz | 300 GHz |
| Bandwidth | ≤2 GHz | 10–50 GHz | 30 GHz (demonstrated) |
| Peak data rate | 20 Gbps | 100–1000 Gbps | 100 Gbps |
| Integration | SiGe BiCMOS | Silicon photonics + CMOS | SOI photonic crystal |
| Power efficiency | 5–10 pJ/bit | <1 pJ/bit | ~0.8 pJ/bit |
| Range (outdoor) | 200 m | 50–100 m | 30 m (lab, LOS) |
How It Works: Photonic Crystal Waveguide
- SOI wafer: 220 nm Si device layer, 2 µm buried oxide (BOX)
- Triangular hole lattice: Period a = 1.2 µm, radius r = 0.35a → TE bandgap 250–350 GHz
- W1 waveguide: Single row of missing holes → slow-light mode, high field confinement
- Grating couplers: Chirped gratings at ends → efficient fibre/Tx-Rx coupling
- Modulation: Carrier depletion PN junction in waveguide → 30 GHz electro-optic bandwidth
- Detection: Integrated Ge photodiode on same chip (heterogeneous integration)
Key Results
- Insertion loss: 3.2 dB/cm (vs >20 dB/cm for strip waveguide at 300 GHz)
- Bandwidth: 30 GHz (3-dB electrical) — limited by RC of modulator
- Modulation: 16-QAM OFDM, 100 Gbps, BER < 10⁻³ (pre-FEC)
- Temperature stability: −40°C to 85°C (Si thermo-optic coeff. compensated by design)
- Fabrication: 193 nm DUV lithography (compatible with 28 nm CMOS line)
JNCASR 6G Chip: FAQ
- Why photonic crystal, not silicon strip waveguide? At 300 GHz, silicon strip waveguides suffer extreme radiation loss (sub-wavelength confinement). Photonic crystal bandgap guiding confines mode in line defect — 10× lower loss.
- Is this a complete transceiver? Chip includes waveguide, modulator, grating couplers. Laser source (external cavity, 1550 nm) and driver/receiver ASIC are off-chip. Next version: heterogeneous InP laser + SiGe driver on same package (2027).
- How does atmospheric attenuation affect 300 GHz? 300 GHz sits in a local transparency window (attenuation ~10 dB/km vs >100 dB/km at 180/350 GHz). Rain: 5 dB/km at 25 mm/hr. Suitable for <100 m links (kiosk backhaul, data centre rack-to-rack).
- What about beam steering? Photonic crystal waveguide feeds on-chip antenna array (8×8 slots). Phase shifters (thermo-optic/carrier) enable ±30° steering. Full phased array demo: 2027.
- India’s 6G roadmap? Bharat 6G Vision (2023): THz testbed, 2025–2030 | JNCASR + IISc + CEWiT (IIT Madras) consortium | Funding: DST (NM-ICPS), MeitY (6G Testbed), SERB | Target: 6G standard contribution (3GPP Rel-20+) by 2028.
You May Also Like
- India 6G Testbed: IIT Madras, IISc, JNCASR Join Forces
- Silicon Photonics for Data Centres: 800G/1.6T Optical Interconnects
Sources
- JNCASR silicon photonic crystal waveguide achieves 100 Gbps at 300 GHz — Nature Electronics (Nov 2026) — Primary: device design, fabrication, 100 Gbps demo, loss/bandwidth data, temperature stability
- JNCASR press release: India’s first terahertz photonic chip for 6G (Nov 2026) — Supporting: PI quotes, consortium details, funding, roadmap
JNCASR 6G Chip in Pictures




